Which Twin-screw Extruder Is Good

The machine head, the machine barrel, the screw, the feeder, the speed reduction distribution box, the heater, the motor, the base and the like of the equidirectional parallel twin-screw granulator are installed into a whole before leaving the factory, and a vacuum station and a cooling water tank are installed in the base to form a main machine part. The main machine is specially assembled and debugged before leaving the factory, and it is generally not suitable for new users to disassemble it at will. The main machine of the plastic extruder can be directly placed on a flat cement floor without a concrete foundation. When installing the main machine, it must be adjusted and aligned. The allowable deviation of the levelness of the main machine is 1.0mm/m. The alignment plane is the upper plane of the base, the plane near the reduction distribution box and the motor. After adjustment, the sizing block shall be padded and fixed with bolts.