Control Of Screw Speed Of Control System Of Large Twin-screw Granulator [kelongweier]

In the last article, the editor told you about the pressure control of the granulator in the control system of the large-scale twin-screw granulator. Today, I will tell you about the control of the screw speed. Here, the editor wishes you a Happy New Year. ! In addition to blessings, let's take a look at the control of screw speed with the editor. Cologne Weir Twin Screw Extruder Equipment (1)

 The important process requirements of the main engine transmission include the adjustment and stability of the screw speed. The screw speed can directly determine the amount of glue and the extrusion speed. In normal production, the maximum linearity is expected to achieve high speed and achieve high production. For large twin-screw granulators, when the screw speed is required from startup to the required working speed, it can be used for The speed control range used is larger. And the requirement for the stability of the rotational speed is high, because the fluctuation of the rotational speed will cause the fluctuation of the extrusion amount and affect the extrusion quality. Therefore, if the speed of the traction line does not change, the outer diameter of the cable will change. Cologne Weir twin-screw extruder equipment

  Well, today I have finished the introduction of the control of the screw speed in the control system of the large twin-screw granulator. Let’s digest and digest with a smile! If there is anything you don't understand, you can consult on this site! Nanjing Cologne Well customer service is online 24 hours a day for you wholeheartedly!