Convenience Analysis Brought By Twin-screw Plastic Granulator!

The following is a brief explanation of the convenience analysis of twin-screw plastic granulation machinery and equipment:

1. Reduce product cost. When producing masterbatches, it is often necessary to change the color tone. If the product needs to be changed, open the open processing area within a few minutes and carefully observe all cross-sections of the extruder screw throughout the melting and mixing process for analysis. At this stage, the usual twin-screw plastic granulation machinery and equipment are changing the color, and you need to use a lot of cleaning pipe dredges, which consumes time, power, and wastes raw materials. A split twin-screw granulator can handle this problem, changing the color tone, opening the barrel quickly in just a few minutes, and cleaning it manually, so that less cleaning materials can be used and costs can be controlled.

2. Improve labor efficiency. When the equipment is repaired and maintained, the general twin-screw plastic granulation machinery is usually the first heating and cooling system to remove and purify the screws. The twin screws are not removed, just a lot of screws, rotating the gearbox up to the top of the rocker means you can open all the cylinder liners and then repair. This reduces maintenance time and labor efficiency.

3. Use twin-screw plastic granulation machinery and equipment to master the damage of parts and components figuratively. Because of the easy opening, they can easily find an externally threaded component with damaged barrel bushings, which can be effectively repaired or replaced. The problem of squeezing the product when not found, causing unnecessary waste.

4. High torque and high speed operation. Nowadays, the global development trend is twin-screw plastic granulation machinery and equipment, with high torque, high speed, and low power, both with high production efficiency and high speed. The cutting twin-screw plastic granulation machinery equipment belongs to this category, and its speed can reach 500 rpm. Therefore, in the production and processing of low viscosity, heat-sensitive raw materials have unique advantages.