What Are The Common Precautions For Extruders?

The extruder is based on the angle between the material flow direction of the die head and the center line of the screw, and the die head can be divided into right angle die head and oblique angle die head.

Nanjing Kelongweier Chemical Machinery Co., Ltd. is a professional manufacturer of plastic extruders, wire wrapping machines, and wire machines. We have a very experienced technical team, and advanced design concepts have continuously improved the quality of our products. What are the common precautions for extruders?

⒈ After 500 hours of first use, replace the lubricating oil once;

In order to better protect the box body of the twin-screw extruder transmission box, the following aspects must be done:

⒉. This extruder adopts No. 150 original medium pressure gear oil for lubrication;

⒊. The normal operating oil volume cannot be lower than the center line of the oil standard, please replenish it if it is lower than the center line;

⒋. Change the oil every 3000 hours after operation;

⒌. Clean the tank and the oil filter when changing the oil. After clarifying the lubricating oil for this operation when changing, put the clean lubricating oil into the tank again to clean the tank, then release it, and then Install new lubricating oil;

⒍. The lubricating oil filter should be cleaned every month during normal operation, and the lubricating oil filter should be cleaned every week during the running-in period. Clean up technically, find the oil filter, turn it on, and take out the dirt;