What Are The Working Site Regulations For Water Ring Pelletizers?

 

 

What are the working site regulations for water ring pelletizers?

The water ring granulator uses carbide cutting tools and has a long service life. At the same time, the separated design is special and easy to clean and maintain. Using these is a great time saver. They can be recycled in 30 seconds without cutting the pellets together for easy cleaning. Because it can be recycled so quickly, it reduces color damage. It can also avoid environmental pollution and adverse effects caused by wrong materials in a short time. Using a medium-speed motor, the noise is particularly small or the energy consumption is low.
When using a water ring granulator, pay attention to rotating the motor rotor by hand before operation to see whether the claw, hammer and motor rotor are operating normally. It should be noted whether the high speed is maintained for 2-3 minutes when starting, and recycling of raw materials is promoted when there is no emergency. It must be managed anytime and anywhere to avoid abnormal device operation.

In the daily use of the water ring granulator, the manufacturing progress may be delayed due to some small common faults.

When the feed side of the granulator is clogged with dirt or the screw channel body falls into a metal hard object, the screw channel will be blocked, resulting in abnormal feeding; the raw materials are not clean and contain residue, the feeding speed is too fast, and the melting temperature Insufficient will cause material to pop out of the exhaust tube; when the heating time is enough, or the electric heater of the water ring granulator does not work, causing the motor to be overloaded, causing the server to not rotate or shut down instantly; when the synchronous belt is loose, damaged, deviation, safety When the key is loose or broken, the main motor rotates, but the screw does not rotate.

Working atmosphere requirements of water ring granulator:
1. The water ring pelletizer is operated by well-trained program operators who understand the structural characteristics and operation conditions of plastic machinery and equipment.
2. Operate strictly in accordance with the operating technical specifications, and do not conduct traffic violation operations during non-operation processes. In order to ensure the stability of the safety device, safety protection measures that effectively damage the equipment must not be pursued.
3. Pay attention to safety and fire protection when using. Fire extinguishers should be placed around machines that use high-temperature thermal oil.
4. Operation requires the use of gear oil that meets the conditions for cleanliness, viscosity and other data, and provides sufficient flow cooling circulating water for the water cooler according to regulations to prevent environmental pollution of the hydraulic oil or damage such as continuous high-temperature blockage and oil leakage. The reducer should be filled with qualified grease.
5. When the water ring cutting machine has abnormalities or abnormalities, it should be reported to the relevant personnel, and then repaired by the maintenance center staff. If any abnormality affecting safety is discovered, press the emergency stop switch immediately.
6. Try not to use low-quality recycled materials with metal material residue or fine sand. Do not place any internal metal that may fall around the feed port of the water ring pelletizer to prevent the steel wire rod from being aggravated, the barrel being damaged or stuck, and being destroyed.