How To Choose A Twin-screw Granulator - Principles Of Selection And Installation Requirements? [kelongweier] (below)

The installation of the twin-screw granulator is very important. Since the correct installation will directly affect the operation of the twin-screw granulator, its installation requirements are as follows:

1. Before installing the twin-screw granulator, please read the operation guide carefully to avoid incorrect installation!

2. Then put the filled container into the tool box, and then connect the external power supply. It should be noted that the power socket must be a triangular socket connected to the ground wire to avoid leakage.

3. Support the twin-screw granulator with the armored support plate, and push the positioning sleeve on the top of the twin-screw granulator. The positioning sleeve can move up and down flexibly, and the filling needle in the twin-screw granulator can freely enter and exit or retract!

4. Turn the switch under the liquid storage tank of the twin-screw granulator to make the material smoothly enter the main metering pump, then turn the knob of the filling speed control board to about 20 degrees, and the switch on the speed control board can be turned off!

5. Set the liquid flowing out of the twin-screw granulator to a fixed amount, then tighten the liquid amount fine-tuning nut, cover the shell of the granulating head, and loosen the support plate of the filling frame.

The above is the principle of choosing a twin-screw granulator and its installation requirements that Xiaobian introduced to you. I hope this article can help you better understand the twin-screw granulator machine. Nanjing Kelongwei customer service is online 24 hours a day. If you have any questions, you can consult on this website at any time.