COLOWE Returns To Work During The National Day Holiday: Leveraging The Co Rotating Twin-screw Extruder As A Pivot To Drive A New Cycle Of Global Circular Manufacturing
1, Why is the fourth quarter of 2026 the key window for the layout of plastic extruders?
The National Day holiday has ended, and Nanjing Kelongwell Chemical Machinery Co., Ltd. has fully resumed production. At this point, there are less than three months left until the end of 2026, but for the global plastic processing industry, the strategic significance of this timeline far exceeds the calendar flipping itself.
According to Mordor Intelligence's "Plastic Extrusion Machine Market Report 2026-2031", the global plastic extruder market is expected to grow from $8.42 billion in 2026 to $11.33 billion in 2031, with a compound annual growth rate (CAGR) of 6.12%. Among them, the twin-screw extruder segment has a faster growth rate, leading the entire category with a CAGR of 6.21%. At the same time, the global market for co rotating twin-screw extruders is expected to reach $1.087 billion by 2026 and climb to $1.296 billion by 2032.
The policy side also sends clear signals. On February 1, 2026, 11 national standards including the "Guidelines for Plastic Recyclable Design" were fully implemented, and for the first time, recyclability requirements were proposed for elements such as resin, labels, and ink from the design end. The revised version of the EU Packaging and Packaging Waste Regulation (PPWR) requires that the recycled content of plastic packaging should not be less than 30% by 2030. This means that from the second half of 2026 to the first half of 2027, it will be the golden window for global plastic processing companies to concentrate on upgrading their production lines and purchasing extrusion equipment - and the ticket to the window is a cost-effective co rotating twin-screw extruder that can stably process high proportions of recycled materials, biodegradable materials, and high filling ratios.

2, Starting production and looking at data: Why is China's plastic extruder export continuing to rise?
According to data from the General Administration of Customs, from January to June 2026, China's cumulative export value of extruders reached 3.354 billion yuan, covering major markets such as Southeast Asia, the Middle East, and Europe. Behind this number, it reflects that global customers' recognition of the quality and cost-effectiveness of domestic plastic extruders is rapidly increasing.
The export data from Kelongwell confirms this trend. In the first half of 2026, the company's export orders for cost-effective extruders increased by 41% year-on-year; In the third quarter, we delivered 50 twin-screw extruder production lines to customers in Europe, Southeast Asia, and the Middle East, including 20 cost-effective co rotating twin-screw extruders used in scenarios such as rPET thickening, PLA/PBAT biodegradation modification, and PE/PP high filling regeneration granulation. Since its establishment, the company's products have been exported to more than 50 countries including Japan, Indonesia, Singapore, Australia, Dubai, etc.
The driving force behind the growth of these orders is not simply price advantage. As pointed out by Plastics Europe in the White Paper on Circular Plastic Processing Technology, the dispersion and mixing efficiency of the co rotating twin-screw extruder determines the degree of mechanical property recovery of recycled materials. High quality equipment can increase the tensile strength retention rate of recycled PP from 72% to 89%. The high cost-effectiveness co rotating twin-screw extruder from COLOWE is precisely using this technological path to help international customers who pursue environmental protection achieve the process goal of "no degradation of recycled materials".
3, Introduction to Technology: What are the core advantages of the COLOWE co rotating twin-screw extruder?
1. Modular screw combination and high torque output
The COLOWE H series and D series co rotating twin-screw extruders both adopt a modular screw structure and a combined cylinder design, which can flexibly adjust the shear and mixing strength according to different formulations. The stepped cylinder design effectively solves the problem of black spots caused by material retention. Taking the 65D model as an example, with a length to diameter ratio of 48:1, a maximum screw speed of 900rpm, and a specific torque of 11.3 N · m/cm ³, it is capable of handling demanding systems such as high calcium carbonate filled PP up to 60% or high viscosity TPE, flame retardant ABS, etc.
2. Hardcore verification of energy efficiency data
According to the statistical data of the China Plastics Machinery Industry Association in 2025, the average specific energy consumption of twin-screw extruders of the same specification and direction is 0.28-0.32 kWh/kg, while the measured energy consumption by Kelongwell is stable at 0.24 kWh/kg, saving about 20% energy. Based on an annual production line of 5000 tons of modified plastics, it can reduce electricity expenses by about 120000 yuan and indirect carbon emissions by about 96 tons of CO ₂ e. For international customers who pursue environmental compliance and operational cost control, this data can be directly converted into quantifiable investment returns.
3. Process adaptation capability for new material development
For international customers who are trying to produce new materials such as bamboo powder/PLA composite materials, starch based degradable materials, and rHDPE pipeline materials, the COLOWE 35D co rotating twin-screw extruder has completed the trial production of a new formula for high filling masterbatch, with an inorganic filling ratio of over 82% and a melt index change rate of only 8%, far below the industry's common 20% fluctuation, leaving a broad process window for customers who are new to plastic granulation. This means that even new entrants lacking experience in extrusion granulation can quickly establish a stable plastic extruder production line with the help of cost-effective co rotating twin-screw extruders.
4, Starting work and answering questions: the three most concerned questions for international customers who are new to us
Q1: Does a high cost-effectiveness extruder mean a compromise in performance?
On the contrary. The core of a cost-effective extruder lies in optimizing the torque distribution gearbox and efficient vacuum stripping system to achieve the unity of stable processes and low energy consumption. COLOWE's cost-effective co rotating twin-screw extruder can process rPE particles with an energy consumption of less than 0.35 kWh per kilogram, while providing CE and other certification systems to help customers smoothly enter regulatory markets such as the European Union. The so-called 'high cost-effectiveness' refers to obtaining the granulation capability of a co rotating twin-screw extruder that meets international standards with a reasonable investment threshold.
Q2: How to avoid the problem of "equipment being unable to run" when trying new material granulation for the first time?
COLOWE has a full process formula testing center, where international customers can send materials for testing and watch the entire granulation process of the co rotating twin-screw extruder in real time. From process debugging to English operation manuals and remote installation guidance, ensure that beginners can achieve stable mass production in a short period of time. This "try first, buy later" model effectively eliminates technical concerns about cross-border production lines.
Q3: Is there any guarantee of delivery time for orders placed after the National Day holiday?
After the National Day holiday, the COLOWE production line has fully resumed operation. The company's total factory covers an area of over 7000 square meters and has complete manufacturing capabilities from core component processing to complete machine assembly. The delivery cycle for standard models is usually 45-60 days, while customized plastic extruder production lines will be confirmed separately based on the complexity of the configuration.

5, Starting work towards the future: Under the wave of circular economy, the value of plastic extruders is being redefined
The white paper "2025 Global Plastic Recycling Extruder Market" by AMI shows that the global production of mechanically recycled plastics is expected to exceed 55 million tons by 2027. According to a report by the United Nations Environment Programme, approximately 400 million tons of plastic waste are generated globally each year, with only 9% being recycled. Mechanical recycling dominates, with co rotating twin-screw extruders being the most critical core equipment.
This means that plastic extruders are evolving from simple "processing tools" to core assets for obtaining green compliance premiums. Nanjing Kelongwell Chemical Machinery Co., Ltd. focuses on the research and development of co rotating twin-screw extruders. For international customers who are new to granulation, we mainly promote a series of high cost-effective extruders, covering laboratory to medium scale production (screw diameter 20-75mm), especially suitable for PCR granulation, biodegradable materials, and development of new materials for engineering plastics.
