News

Minutes Of The COLOWE Special Meeting: Make The First Co Rotating Twin-screw Extruder A Certainty For Customers To Dare To Invest, Be Able To Use, And Calculate Accounts

The meeting did not stop at the level of "parameter benchmarking". The technical, delivery, and overseas service teams have jointly confirmed a conclusion: what the customer wants is not a cheap machine, but a startup plan that does not make mistakes from the "first ton of material". For first-time customers, the biggest hidden cost is never in the purchase price tag, but in the time and confidence consumed by trial and error, downtime, and process amplification failures.

twin screw extruder


1. The meeting first calibrated a premise: the market is rising, but the customer's decision-making logic has changed

The global plastic extruder market is expected to reach approximately $8.42 billion in 2026, with twin-screw extruders growing at a faster rate than single screw extruders. It is projected to maintain a compound annual growth rate of approximately 6.21% from 2026 to 2031. The main driving forces for growth come from two directions: the mandatory increase in the compliant blending ratio of recycled materials, and the expansion of high filling and functional modification scenarios.

But increment does not equal a low threshold. The meeting pointed out that international customers who are new to co rotating twin-screw extruders face a situation of "information overload but scarce judgment basis": they can understand the parameter table, but cannot understand whether they can run it when they buy it back; The price can be compared, but the cost per ton in three years cannot be calculated. The white paper on circular plastic processing technology released by Plastics Europe once made a key judgment: the dispersion and mixing efficiency of the mixing type co rotating twin-screw extruder directly determines the degree of mechanical property recovery of recycled materials. High quality equipment can increase the tensile strength retention rate of recycled PP from about 72% to 89%. This means that the value of a cost-effective plastic extruder should be redefined by "performance retention rate" and "one-time startup success rate", rather than measured by bare machine quotes.


2. Pull "high cost-effectiveness" back from the marketing term to the engineering definition: ton of electricity consumption and one-time start-up rate are the hard benchmarks

The meeting broke down the verifiable indicators of COLOWE at the customer site item by item. Taking the 65mm co rotating twin-screw extruder platform as an example, with a length to diameter ratio of 48:1, a maximum screw speed of 900rpm, and a specific torque of 11.3 N · m/cm ³, this combination has been tested to consume 0.25 kWh/kg of electricity per ton in continuous production of PP+40% calcium carbonate filling granulation, saving about 15% -20% energy compared to the industry's common level. In the scenario of rPET bottle flakes without drying and thickening, the combination of dual stage co rotating twin-screw and vacuum devolatilization unit can increase the IV value from 0.55 dL/g to 0.78 dL/g, saving about 35% energy compared to traditional crystallization drying routes.

For customers who are new to plastic extruders, the significance of these data is not about "running points", but about making visible the invisible operating costs in advance. Based on an annual production of 2000 tons of modified materials, the annual difference in electricity costs alone is sufficient to cover the procurement cost of one auxiliary machine. More importantly, consistency is crucial: among the first production line customers delivered by COLOWE in the first half of 2026, 19 completed installation, commissioning, and produced qualified particles within 7 days of arrival at the factory, with a success rate of 93% for one start-up. The consensus reached at the meeting is that the "cost-effectiveness" of a high cost-effective extruder consists of the numerator being the stable output of qualified particles, and the denominator being the purchase cost plus the full lifecycle energy consumption and trial and error losses. Only when two numbers are established simultaneously, can a co rotating twin-screw extruder be worthy of the words "high cost-effectiveness".


3. What adjustments did Kelongwell make to the three real checkpoints for first-time customers

The meeting sorted out the three most concentrated obstacles in overseas first-time customer feedback and confirmed corresponding response actions.
Stuck point 1: The laboratory is feasible, mass production of 'face changing'. The 35 machine sample is well dispersed, but when placed on the 65 or 95 machine, there is a typical amplification effect in the extrusion process, such as burning, bleeding, or dispersion regression. COLOWE's response is not to let customers "explore on their own", but to use specific mechanical energy (SME) as the amplification logic in the screw configuration recommendation stage, controlling the input of specific energy from pilot to mass production within a reasonable range, and reducing process accidents such as "solid phase unmelted" or "excessive degradation". For customers who are trying new material systems such as PLA/PBAT and bamboo powder filling, a combination of small lead deep groove and low-temperature kneading can be switched. The maximum temperature of the melt is 12-18 ℃ lower than traditional designs, with a temperature control accuracy of ± 1 ℃.
Stuck point 2: The formula has been changed, and the cleaning switch has consumed the profit. Customers who are trying new materials for the first time often have small batches and multiple varieties, and the washing time directly determines the unit cost. COLOWE adopts modular threaded components and split barrel, and the entire screw configuration can be reorganized, reducing thorough cleaning time by about 40% compared to traditional models, making flexible manufacturing economically feasible in small batch scenarios.
Stuck point 3: I can afford it, but I don't know how to use it. COLOWE provides turnkey services from material testing, screw configuration recommendations to overseas installation, debugging, and operation training. The PLC system is pre-set with a "formula package" that supports one click calling of process parameters, reducing human error even for teams with limited operating experience. The equipment can be equipped with contact materials that comply with REACH and RoHS, and provide energy efficiency testing reports to help customers respond to EU customers' requirements for ESG data.


4. Key Q&A: Three questions that were not avoided at the conference venue
Q: Can the co rotating twin-screw extruder withstand wear and tear when we add 60% calcium carbonate or wood powder for high filling?

The answer given at the meeting is not 'can withstand', but rather provides verifiable boundaries. A cost-effective co rotating twin-screw extruder optimized for high filling systems, with high chromium cast iron or bimetallic overlay welding used for the screw and cylinder, and a Rockwell hardness of HRC58-62. In the continuous operation test of calcium carbonate filled PP (60% filling), the outer diameter wear of the screw was less than 0.15mm after 2000 hours. Combined with the "low shear, high dispersion" screw combination and lateral forced feeding, excessive shear was avoided to prevent wood powder carbonization.


Q: Does high cost-effectiveness mean "quietly reducing" the configuration of core components such as gearboxes and temperature controllers?

The meeting explicitly rejected this assumption. The cost space of high cost-effective extruders comes from standardized mass production of gearboxes, uniform cylinder pitch, and reduction of unnecessary customization items, rather than the degradation of core transmission and control. COLOWE provides a 5-year warranty for the gearbox of twin-screw extruders, with a designed bearing life of 100000 hours, which is consistent with the core transmission indicators of mainstream European brands; The difference is mainly reflected in brand premium and ultra high speed customization segment, while 95% of modified granulation scenarios can be covered within 900rpm.


Q: How do we determine if a plastic extruder is truly suitable for our materials when we are making our first foreign trade purchase?

The meeting suggested that the client reverse the order of judgment: first send the sample, then consider the screw configuration suggestion, and finally negotiate the price. Based on over 4000 sets of laboratory formula data, Kelongwell can provide recommended screw configurations and temperature curves within 72 hours of receiving customer material samples; The experimental equipment can handle 2-10 kg/h of trace formula validation, and the process parameters from pilot to mass production have a linear translation basis. For teams that are new to plastic extruders, this means that the selection of co rotating twin-screw extruders is no longer a "guess", but a validation path that can be completed with a small amount of material.

twin screw extruder


5. Meeting conclusion: Make the "first device" a production certainty that can be replicated by customers

The final judgment reached at the COLOWE special meeting is that, for international customers who pursue environmental protection, high cost-effectiveness, and try new materials, the focus of competition for plastic extruders has shifted from "who can increase parameters" to "who can stabilize the first leap from formula to mass production for customers". The technological depth of co rotating twin-screw extruders, coupled with the verifiability of cost-effective extruders in terms of full lifecycle energy consumption and turnkey services, constitute the core approach of COLOWE in responding to this demand. For customers who are evaluating their first production line, what COLOWE offers is not an isolated machine, but a startup plan from material testing, screw configuration to start-up acceptance - making "choosing the right one the first time" a replicable certainty, rather than luck.

You Might Also Like

Send Inquiry