News

What Are The Advantages Of The COLOWE Co Rotating Twin-screw Extruder? ——From Finished Product Effect To Defect Rate, Dismantling The Real Ledger Of A Cost-effective Extruder

Conclusion first: High cost performance extruders are not cheap to buy, but do not waste every kilogram of material or kilowatt hour of electricity. For international customers who are new to modified granulation, trying new or recycled materials, the biggest cost is never the equipment purchase price, but the implicit consumption caused by trial and error waste, frequent downtime, and unstable yield. The co rotating twin-screw extruder of Nanjing Kelongwell Chemical Machinery Co., Ltd. breaks down "reducing defect rate" into three verifiable engineering actions: precise control of specific energy consumption, matching of screw configuration and materials, and low switching costs brought by modularization. Let's break it down layer by layer using pyramid logic.

twin screw extruder


1, The root cause of poor yield often lies in "energy input mismatch" rather than operation

When plastic extruders are used for new or recycled materials, defective products are mainly manifested as "solid phase incomplete melting", "excessive degradation yellowing", and "uneven particle density". The classic conclusion of Dow Chemical's twin-screw amplification research points to the same core variable: Specific Mechanical Energy (SME). The design starting point of the KLWE series co rotating twin-screw extruder from COLOWE is to control the SME from the laboratory to the production line within a narrow window of 0.079-0.086 kWh/kg, avoiding the occurrence of both "under shear" and "over shear" simultaneously. This means that first-time customers do not need to rely on experienced technicians to adjust the machine by hand, as the equipment itself narrows the process window to a safe range.

The improvement in yield is supported by workshop data: in the PBAT degradable material scenario, after the temperature control accuracy converged from the extensive state to ± 1 ℃, the yield increased from 85% to 96%. On the PC recycling granulation line, the 65D model only consumes 0.23 kWh of electricity per ton, and the retention rate of the tensile strength of recycled particles is as high as 96%. For first-time buyers who pursue environmental protection and high cost-effectiveness, these numbers directly correspond to "less waste, more genuine products".


2, The 'good' of co rotating twin-screw extruders is that they lock energy consumption and defect rate into the same design logic

Traditionally, "energy conservation" and "quality" are viewed separately, but in actual production, the two are mutually causal: uncontrolled energy consumption is often accompanied by fluctuations in melt temperature, which in turn directly produce defective products. The screw components of the COLOWE co rotating twin-screw extruder are modularly combined, with a length to diameter ratio covering 28 to 64 and a torque level of 1.5-15 N · m/cm ³. The screw configuration and cylinder functional zone can be "reverse deduced" based on the rheological properties of the material. The hard indicators brought about by this design path are: the industry average specific energy consumption of twin-screw extruders of the same specifications and direction is 0.28-0.32 kWh/kg, which has been tested and stabilized at 0.24 kWh/kg by Kelongwell, saving about 20% energy. If estimated based on an annual production of 5000 tons of modified plastics and an industrial electricity price of 0.8 yuan/kWh, only electricity costs can save about 120000 yuan annually, and indirect carbon emissions can be reduced by about 96 tons of CO ₂ e.

A higher-level validation comes from a high concentration masterbatch scenario: the 35 type co rotating twin-screw extruder completes dispersion validation of 40% -50% pigment filling at a length to diameter ratio of 48:1, relying on a "multi-stage dispersion+controllable shear" screw combination to achieve the expected standard of coloring power and dispersion of the final masterbatch particles. The upper limit of the finished product effect is essentially determined by the "material matching degree" of the screw combination, rather than simply stacking speed or torque.


3, Customers who are trying new materials for the first time should focus on "switching costs" rather than "purchase unit prices"
Q1: When buying a plastic extruder for the first time, I can't understand the aspect ratio and torque ratio. How can I determine whether a cost-effective extruder is worth it?

Look at three operational indicators, not the quotation: electricity consumption per unit output, formula switching scrap rate, and trouble free running time. The modular threaded components and split cylinder design of Kelongwell enable the entire screw configuration to be quickly rearranged, reducing thorough cleaning time by about 40% compared to traditional models, directly reducing switching losses in small batch and multi variety scenarios. The entry-level environmentally friendly plastic extruder has lowered its price by 18% through modular design, but the gear box carburizing, quenching, grinding process, and barrel bimetallic centrifugal casting configuration have not been reduced. For first-time buyers with limited budgets who are unwilling to compromise on core components, 'price restraint and parameter non restraint' itself is a verifiable cost-effectiveness.


Q2: With increasingly strict environmental regulations, how can a plastic extruder be considered "keeping up"?

The revised version of the EU PPWR requires that the recycled content of plastic packaging should not be less than 30% by 2030, and CBAM has included polymers in carbon accounting. The AMI Consulting Global Twin Screw Extruder Market Report points out that by 2025, the installed growth rate of co rotating twin screw extruders in the recycling field will reach 8.7%, and energy-saving and cost-effective plastic extruders have become the primary factor in procurement ranking. The rPET bottle slice non drying and thickening line from Kelongwell adopts a two-stage co rotating twin-screw extruder combined with a vacuum devolatilization unit, which increases the IV value from 0.55 dL/g to 0.78 dL/g, saving 35% energy compared to the traditional crystallization drying route; The VOC residue of regenerated PP/PE can be stably controlled below 50 ppm, meeting the entry threshold of high-end packaging supply chain. Environmental compliance is no longer just a brand slogan, but a clear admission account that must be calculated when selecting equipment.


Q3: What does delivery and start-up speed mean for customers who are making new materials for the first time?

According to operational data from the exhibition hall of the second factory in Cologne, the average delivery cycle of conventional twin-screw extruders is 43 days, which is about 30% shorter than the industry average; The pass rate of the first power on acceptance of the delivered equipment at the customer's site in the past 12 months has reached 99.2%. The aging test with materials before leaving the factory should not be less than 8 hours, and the temperature control fluctuation should be controlled within ± 1 ℃. In the first half of 2026, the export orders of cost-effective extruders from COLOWE increased by 41% year-on-year. Among the 7 twin-screw extruder production lines delivered in the third quarter, 5 were of the same direction twin-screw type, covering rPET thickening, PLA/PBAT biodegradation modification, and PE/PP high filling regeneration granulation scenarios. For a factory that is trying new materials for the first time, "producing qualified products in one start-up" saves not only debugging time, but also the cash flow of the first batch of orders.

twin screw extruder


4, Make 'reducing defect rate' a systematic capability rather than a single parameter

According to the "White Paper on Energy Efficiency of Plastic Processing Equipment" released by the Joint Research Center of the European Commission in 2025, the optimized design of co rotating twin-screw extruders can reduce unit power consumption by 18% -25% compared to traditional single screw equipment. But what truly transformed this decrease into an increase in yield rate were two things that COLOWE did at the production line level: first, the experimental equipment and mass production equipment use exactly the same geometric parameters of screw components, and the amplification process does not require re exploring the process window, directly reducing the cost of trial and error materials and time; Secondly, the modular platform allows the same cost-effective extruder to switch between rPET, PLA/PBAT and high filled PP without replacing the whole machine, and only needs to rearrange the screw assembly and cylinder function area. For international customers who pursue environmental protection, are budget sensitive, and want to retain process flexibility, the ability to "buy one machine and cover multiple new material routes" is closer to the real investment return than any single parameter.

By 2025, the global market size of twin-screw extruders has reached 8.261 billion yuan, with a market size of 2.224 billion yuan in China. It is expected that the global market size will approach 11.957 billion yuan by 2032. The market is growing, but the focus of competition has shifted from "whether there is equipment" to "whether the equipment can lower the defect rate, reduce energy consumption, and test new materials". The answer to the COLOWE co rotating twin-screw extruder is very clear: the finished product effect depends on the matching of SME and screw configuration, reducing the defect rate depends on modularity and consistent amplification, and high cost-effectiveness depends on the precise consumption of every kilowatt hour of electricity and every kilogram of material on the production line.

You Might Also Like

Send Inquiry