What Factors Affect The Price Of Twin Screw Extruders? Its Noise Should Be Solved Like This!

In the process of selecting twin-screw extruders, everyone basically pays attention to the price of the equipment. This is mainly because the price will directly affect the very important reason we choose. Then which aspects will be Does it directly affect its price? The editor, I summarized it, mainly because of the functionality and the different processing technology of the corporate brand. In the process of selecting equipment, if everyone notices that the equipment is malfunctioning, they must also know how to solve these problems. In the article, I will focus on the reasons that will directly affect the price of the twin-screw extruder, as well as the noisy solutions to give everyone a complete introduction.

The reasons that will directly affect the price of the twin-screw extruder:

1. The functionality is not the same

The functionality of the twin-screw extruder has been improved as a whole in recent years. The actual production and manufacturing effects that can be achieved not only ensure stronger strength, but also more and more functions that can be implemented. The design costs and production consumables that must be imported for the perfection of sex are basically different, which causes the price of the twin-screw extruder to be different.

The twin-screw extruder with good product quality and excellent service has carried out a clear product classification, which can effectively ensure the precise matching of functionality and demand, thereby ensuring the cost-effective selection. Therefore, we are exploring the price of twin-screw extruders. In the link, it is necessary to compare the selection of functionality and the value that can be generated together.

2. Different corporate brand processing technology

To a large extent, the competitive advantage of a corporate brand is related to its technological level. Only by mastering more core processing techniques can the corporate brand go further. In order to create a better processing technology, the cost base must be very large, so the price of twin-screw extruders of different corporate brands also has corresponding differences.

At present, the quotation of twin-screw extruders will be classified according to the company's brand, so that the price will be more targeted. Therefore, in a corresponding sense, the processing technology of the corporate brand will also directly affect the pricing orientation of the twin-screw extruder, but the guaranteed value and significance of the corporate brand will also be higher.

The solution to the high noise of the twin-screw extruder:

1. There may be a bearing problem in a certain part of the twin-screw extruder , which makes the equipment work abnormally and the operating current will fluctuate. The operating current is too high, so be sure to stop the machine for inspection or dismantle and replace the bearing.

2. The ring die of the twin-screw extruder is blocked, or only part of the die hole is discharged. Foreign matter enters the ring die, the ring die is out of round, the gap between the pressure roller and the pressure die is too tight, the pressure roller is worn or the pressure roller bearing is damaged and cannot roll, basically there will be extruder vibration.

3. The calibration of the coupling of the twin-screw extruder is unbalanced, the unevenness of the left and right sides is deviated, the extrusion chance will be oscillating, and the gear shaft oil seal is easy to be damaged, the coupling must be calibrated to the horizontal line.

4. The main shaft of the twin-screw extruder is not tightened, especially for D or E type machines. If the main shaft is loose, it will move back and forth in the axial direction. The pressure roller swings significantly. The noise of the extruder is large and it is difficult to pelletize. Need to tighten the butterfly spring and round nut at the tail of the spindle.

5. The large and small gears of the twin-screw extruder are worn. If a single gear is removed and replaced, the problem of high noise in the operation of the machine will also occur.