Do You Know The Operating Principle Of Twin Screw Extruder?
Speaking of extruders, which extruder does everyone think of first? Is it a single-screw extruder or a twin-screw extruder? At present, the most commonly used in the processing industry is the twin-screw extruder. Compared with single-screw extruder, this equipment has some advantages that single-screw extruder does not have, such as lower production cost, higher production efficiency, high torque, high speed and other advantages. So do you know what the operating principle of the twin-screw extruder is? The following editor will introduce the operating principle from different types of extruders, and introduce its advantages in detail by the way. Interested friends will come to understand Take a moment. From the point of view of the operating principle, the twin screw extruder has different intermeshing, non-intermeshing and non-intermeshing types.
1, co-rotating intermeshing twin-screw extruder
There are two types of extruders, low-speed and high-speed. The former is mainly used for profile extrusion, while the latter is used for special polymer processing operations.
(1) Close-intermeshing extruder. The low-speed extruder has a tightly meshing screw geometry, in which the spiral edge shape of one screw closely matches the spiral edge shape of the other screw, that is, the conjugate screw shape.
(2) Self-cleaning extruder. The high-speed co-rotating extruder has a closely matched spiral shape. This kind of screw can be designed to have a relatively small screw gap, so that the screw has a closed self-cleaning effect. This kind of twin-screw extruder is called a compact self-cleaning co-rotating twin-screw extruder.
2, counter-intermeshing twin-screw extruder
The gap between the two screw grooves of the tightly meshing counter-rotating twin-screw extruder is very small, so it can achieve positive conveying characteristics.
3, non-intermeshing twin-screw extruder
The center distance between the two screws of the non-intermeshing twin-screw extruder is greater than the sum of the radii of the two screws.
