Weight Loss Weighing Feeding And Forced Side Feeding: A Key Choice To Unlock The Potential Of Twin-screw Extruders
Introduction: Feeding System - The "Throat" of Efficient Extrusion Production Line
In the context of the global plastic processing industry's transformation towards energy conservation, environmental protection, and efficient production, choosing the appropriate feeding system has become unprecedentedly important. For international customers who pursue environmental protection and high cost-effectiveness, and are trying to produce new materials or are new to plastic granulation, the choice of feeding system is the first key decision that determines the success or failure of an efficient extruder production line. It is like the "throat" of a production line, directly related to whether the subsequent co rotating twin screw extruder can exert its excellent mixing and dispersing ability, ultimately affecting product quality, production efficiency, and operating costs. This article will delve into the core differences between weightlessness weighing feeding systems and forced side feeding systems, providing you with a clear and professional selection guide.

1, Core Decision Framework: Understanding the Strategic Significance of Feeding Systems
1.1 Market Trends and Environmental Drivers
Currently, the global extruder market is expanding at a compound annual growth rate of approximately 5.5%. At the same time, mechanical recycling of plastics, especially polyolefins such as polypropylene (PP), high-density polyethylene (HDPE), and polyethylene terephthalate (PET), has shown strong growth momentum. Despite the price pressure brought by the surplus of native resins, the market demand for equipment using recycled and bio based materials is steadily increasing driven by policies and environmental awareness. This requires modern plastic granulation production lines to have the ability to handle complex formulas and diverse raw materials (including recycled materials and fillers).
1.2 Feeding system: the cornerstone of accuracy and stability
The core task of the feeding system is to stably and accurately transport polymer raw materials, recycled materials, fillers, and additives to the main body of the co rotating twin screw extruder. Its accuracy and stability directly determine:
·The quality consistency of the final plastic particles.
·The utilization rate of expensive additives such as flame retardants and fiberglass affects costs.
·The ability of the production line to cope with fluctuations in raw materials and ensure continuous production.
2, In depth analysis of two feeding systems
2.1 Weight Loss Continuous Weighing and Measuring Feeding System
The weightlessness weighing feeding system controls the feeding amount by real-time measuring the rate of weight reduction of the hopper, achieving high-precision continuous measurement.
Core advantages:
·Excellent accuracy: Using high-sensitivity weighing sensors and closed-loop control, it can achieve extremely high measurement accuracy, with errors controlled within ≤ 0.5%, especially suitable for formulas with strict proportioning requirements.
·Wide material adaptability: The system can adapt to handle various forms of materials, including powders with poor fluidity, materials that are prone to moisture absorption and agglomeration, and short fibers.
·Integration and Automation: Easy to integrate with automatic batching and vacuum feeding systems, achieving fully automated processes from feeding to metering, reducing manual intervention, and ensuring stable quality.
Key challenges:
·There are certain requirements for the fluidity of materials, and it is necessary to prevent the bridging of powder in the hopper from affecting the continuity of feeding.
·The system is relatively complex, and the initial investment is usually high.
2.2 Forced side feeding system
The forced side feeder is usually installed at the lateral opening of the twin screw extruder, and the material is forcibly and positively pushed into the main screw barrel through an independent screw.
Core advantages:
·Powerful conveying capacity: It has the characteristics of large feeding capacity and stable feeding for powder materials or short fiber materials, which can effectively solve the problem of stuttering in the main feeding of low bulk density materials.
·Improving process flexibility: allowing the addition of shear or heat sensitive components (such as fiberglass, some additives) during the extrusion process to protect their performance, which is a common method in efficient twin screw granulation processes.
·Increasing the packing density: When feeding the powder, the side feeder can cooperate with the machine barrel to form negative pressure suction, increasing the packing density of the powder and significantly improving the feeding efficiency.
Key considerations:
·Its measurement accuracy usually depends on volumetric measurement or when used in conjunction with a weightlessness scale.
·Mainly used for main feeding or supplementary feeding of specific components, rather than high-precision metering of the entire formula.
3, How to choose the best solution for your formula and host
Choosing a feeding system is not an independent decision, it must be closely integrated with the process requirements of your co rotating twin screw high-efficiency extruder.
3.1 Selection based on the characteristics of raw materials
·The preferred scenario for weight loss weighing and feeding is when the formula contains multiple components with significant differences in flowability, such as resin particles, fine powder fillers, and trace additives; Using a high proportion of post consumer recycled plastics (PCR) and irregular recycled material fragments; Producing high value-added modified plastics (such as flame retardant masterbatch and alloys), the precision of expensive additives is related to cost and performance.
·Scenarios requiring forced side feeding: The main raw material is lightweight powder with low packing density (such as calcium carbonate); A large amount of short cut glass fibers need to be added for reinforcement and modification; Process the agglomerated or gelatinous material after mixing.
3.2 Characteristics of matching co rotating twin screw extruders
Modern co rotating twin screw extruders are renowned for their excellent mixing, self-cleaning capabilities, and high-speed operating potential. To fully utilize the efficiency of the host, the feeding system must provide a stable and non pulsating material flow. The precise continuous feeding of weightlessness scale can ensure that each mixing section of the host is in the optimal filling state, which is the basis for achieving efficient plastic extrusion granulation. For formulas that require large doses of fillers or fiberglass, forced side feeding is a key auxiliary to ensure sufficient feeding of the host and avoid hunger feeding.
3.3 Balancing Long term Costs and Investment Returns
Although the initial investment of the weightlessness weighing system is relatively high, from the perspective of the entire production cycle, it can bring higher investment returns by reducing raw material waste, improving product qualification rate, and reducing material replacement and cleaning time. This is deeply in line with the demand of international customers for high cost-effectiveness (optimal full lifecycle cost, rather than the lowest initial price).

4, Key Question and Answer (Q&A)
Q1: As a first-time investor, I want to ensure product quality while also controlling initial costs. How should I choose?
A1: Adopt a step-by-step strategy. Firstly, ensure that the core raw materials (such as base resin and main additives) are fed using high-precision weight loss scales, which is the bottom line of quality. For bulk fillers (such as mineral powder), volumetric feeders or forced side feeders with basic metering functions can be considered in the initial stage. After stable production and sufficient funds are available, they can be upgraded to a full weight loss scale system. Nanjing Kelongwell Chemical Machinery Co., Ltd. can provide modular and upgradable plastic extruder feeding solutions of this kind.
Q2: I plan to use over 50% recycled plastic pellets. Which system is more suitable?
A2: It is strongly recommended to equip with a weight loss weighing feeding system. Recycled materials (PCR) have irregular morphology, unstable packing density, and poor fluidity. The weightlessness scale is based on weight measurement and is not affected by changes in material volume. It can overcome the problem of uneven feeding caused by fluctuations in recycled materials to the maximum extent possible, ensuring stable performance of the final recycled plastic particles and meeting downstream customer requirements.
Q3: How should I configure the feeding system for producing fiberglass reinforced plastic?
A3: Recommend the combination scheme of "main feeding+side feeding". The base resin and additives are fed into the machine head through a main weight loss scale. Short cut glass fibers are forcibly added laterally in the downstream of the melting section through a dedicated forced side feeder. This can prevent the glass fiber from experiencing excessive damage due to premature high shear, maintain the aspect ratio, and effectively improve the mechanical strength of reinforced plastic particles.
Q4: If I need to frequently change formulas or colors in the future, which system has better flexibility?
A4: The weightlessness weighing feeding system has more advantages in terms of material flexibility. Due to its easy disassembly and cleaning of the hopper and screw components, combined with the excellent self-cleaning effect of the twin screw extruder itself, it can significantly reduce the cleaning time and raw material waste during color and material changes. Some high-end weightlessness weighing systems can also store multiple formula parameters and achieve one click switching.
Conclusion: A wise choice towards a sustainable future
In the era of profound transformation of the plastic industry towards a circular economy, choosing a feeding system is no longer just about selecting a single equipment component, but about building long-term competitiveness for your enterprise to cope with changes in raw materials, environmental regulations upgrades, and new market demands. Whether you ultimately choose a high-precision weight loss weighing feeding system, a strong conveying forced side feeding system, or a smart combination of the two, the core principle is to perfectly match it with your co rotating twin screw extruder host and specific material formula.
For international customers who are committed to environmental protection and pursue high cost-effectiveness, working together with partners who can provide complete solutions from feeding to finished products (such as Nanjing Kelongwell Chemical Machinery Co., Ltd.) for professional evaluation and planning will be the solid first step for you to successfully enter the field of efficient plastic granulation and steadily produce high-quality new or recycled materials.
