Type 4 Extrusion Process: Direct, Indirect, Hydrostatic And Impact
Extrusion is a basic manufacturing process used to create an object with a constant cross section by forcing the material through the mold. From automotive and construction to packaging and aerospace, industries rely on extrusion to efficiently produce pipes, shapes, plates and complex components. Understanding the four main types (direct, indirect, hydrostatic, and impact) helps manufacturers to select the right method for material properties, shape complexity, and throughput.

What is extrusion?

During extrusion, the blank or material (metal, plastic or others) is pushed through the die opening under pressure. Depending on the temperature, the process can be hot, hot or cold. Compared with other forming methods, it has high productivity, excellent surface finish and material efficiency.
- The difference between the four main types is mainly the way the force is applied and the flow of material.
The ram pushes the billet through the fixed die in the same direction as the ram movement. Friction between the billet and the vessel wall requires more force.
Main features:
- Easy setup and tools
- Suitable for aluminium, copper and other metals
- For bars, bars, tubes and solid sections
Advantages: low mould cost and large production.
Limitations: Higher friction results in greater energy usage and possible surface defects.
This approach dominates the production of aluminium profiles for windows, doors and structural components.
2. In indirect extrusion, the die moves towards the billet while the billet remains stationary relative to the container. The material flows through a hollow punch or die assembly in the opposite direction to the punch.
Main features:
- Reduction of friction between billet and vessel
- Low extrusion pressure required
- For longer or more complex sections
Advantages: improve surface quality, reduce power consumption and heat generation.
Limitations: In some settings, more complex dies and limited billet length.
For high precision or heat sensitive materials, manufacturers prefer indirect extrusion.
3. Hydrostatic pressing
The hydrostatic extrusion uses a pressurized fluid (typically oil) around the billet to transfer the force. The billet is not in direct contact with the vessel wall and virtually eliminates friction.
Main features:
- Possible very high pressure
- Suitable for brittle or difficult to squeeze materials
- Capable of operating at room temperature or high temperature
Advantage: excellent surface finish, high reduction rate, and minimized material waste.
Limitations: Special high pressure equipment and fluid handling required.
This process has an outstanding advantage in the production of thin lines, tubes and special alloys.
4. Impact extrusion
Impact extrusion forces the material by high speed punch impact, usually in one impact. Commonly used for forming thin-walled hollow parts.
Main features:
- Very fast cycle time
- Production of foldable tubes, cans and battery boxes
- Commonly used for cold working of soft metals such as aluminium, tin or lead
Advantages: fast production speed, good dimensional accuracy and processing hardening strength.
Limitations: limited to simpler symmetric shapes and softer materials.
Many everyday products, such as toothpaste tubes and aerosol cans, start with impact extrusion.
The choice depends on several factors:
- Material properties (toughness, hardness, temperature sensitivity)
- Required product shapes and tolerances
- Production volume and cost targets
- Available press capacity
Direct and indirect methods handle large scale continuous production, while hydrostatic and impact meet professional or high precision requirements.
Cross-industry application
The extrusion process produces:
- Building materials (frames, pipes)
- Automotive components (decorative parts, radiator, structural parts)
- Packaging (pipes, containers)
- Electrical products (wire insulation)
- Consumer goods and medical devices
The combination of extrusion with downstream processes such as cutting, machining or coating further expands the possibilities.
Advantage of extrusion technology
Modern extrusion provides consistent quality, material saving and design flexibility. Advances in mold design, temperature control, and automation continue to increase efficiency and expand material selection, including composite materials and recycled contents.
Contact our team for expert guidance on selecting extrusion equipment, process optimization, or custom solutions to meet your production requirements. We provide manufacturers with reliable mechanical and technical knowledge to achieve better results.
Today, consult on extrusion process and equipment.

